Bass inside the wall, amplification outside it
The IW-28 SUB/SA-200 package pairs an in-wall bass speaker with a separate mono amplifier. It keeps the subwoofer cabinet out of the room while leaving amplification accessible.
The wall opening and speaker cable run are installation decisions, not finishing touches. Check the mounting requirements and amplifier connections before the wall is closed.
| IW-28SUB / Type | Thin Bezel In-Wall Subwoofer |
|---|---|
| IW-28SUB / Woofer | Dual 8" (203mm) long-throw, 40mm voice coil |
| IW-28SUB / Frequency Response | 38-200 Hz +/-3dB |
| IW-28SUB / Nominal Impedance | Each driver 8 ohms; paralleled together, system is 4 ohms |
| IW-28SUB / Crossover Frequency | 200 Hz w/built-in low-pass filter |
| IW-28SUB / Sensitivity | 89dB |
| IW-28SUB / Recommended Amplifier | 30-200 watts RMS |
| IW-28SUB / Dimensions with grilles(W x H x D) | 12 5/8 x 21 7/8 x 3 7/8" (319 x 554 x 100mm) |
| IW-28SUB / Cutout Dimensions (W x H) | 11 1/8 x 20 3/8" (283 x 518mm) |
| IW-28SUB / Weight (ea) | 20 lbs |
| SA-200 / RMS Power | 200 watts, 4 ohms |
| SA-200 / WoofSignal to Noise Ratio | -97dB @ full power |
| SA-200 / Frequency Response | 20-150Hz +/-3dB |
| SA-200 / Input Sensitivity | 250mw full output, 100Hz |
| SA-200 / Input Impedance | 15K Ohms |
| SA-200 / Peak Output Stage Current | 30 amps |
| SA-200 / Dimensions(W x H x D) | 17 7/8" x 4“ x 13 1/4 (215x50x320mm) |
| SA-200 / Weight (ea) | 13 lbs. (6kg) |